Causes of toilet blockage - Treatment of toilet blockage
Causes of toilet blockage
The toilet in the bathroom will also get blocked if you accidentally. What should I do if the toilet is blocked? First, let’s analyze several reasons that may cause toilet clogging:
1. Toilet installation errors
are generally divided into: the outlet at the bottom is not aligned with the sewer, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet to drain and the toilet tank water level is not high enough to affect the flushing effect.
2. Slight blockage of toilets is generally caused by toilet paper, sanitary napkins, towels and rags, etc. This way, it can be cleared by using a pipe dredging machine or a simple dredging tool.
3. When the toilet is blocked, it accidentally falls into a plastic brush, bottle cap, soap, comb and other hard objects. If the blockage is mild, you can use a pipe dredger or a simple dredger to directly clear it. In severe cases, the toilet must be removed and cleared. This situation can only be completely solved by getting the things out.
4. If the toilet is aging and blocked, the toilet will inevitably become stained on the inner wall. In severe cases, the toilet will be blocked and the toilet will be drained slowly. The solution is: find the ventilation hole and scrape the dirt to make the toilet drain smoothly.
Treatment for toilet clogging
When the rag is clean and hygienic in the toilet, it is easy to pour into the toilet if it is not paid attention to in the bucket or basin. How to deal with it?
Treatment method:
(1), use thin iron wire to make a hook shape, slowly extend it into the toilet and turn it to the right. When you feel the wire has gravity, slowly rotate it outward and pull it out.
(2) Turn to the right with a hand-cranked wire dredger. When you feel that the wire has gravity, do not stop rotating and pull out slowly.
(3), If neither of the above methods can be taken out, then you can only ask a professional to deal with it. Special attention: You cannot flush with water when the rag falls into the toilet, because the pressure of the rag will cause the rag to be tighter and will affect the removal, causing greater trouble, and in severe cases, it will cause the rag to be unable to be removed. Only by removing the toilet can it be removed.
Treatment method for soap removal in the toilet:
(1) Use hot water to slowly pour hot water on the water surface in the toilet. Do not pour hot water too quickly and be careful to burn the toilet. Generally, the three or four kettles of hot water can solve the problem.
(2), stir the wire with hand shaking for 5 minutes, then pull out the wire, check if there is soap residue on the head of the wire, and then drain some toilet paper into the toilet and rinse it in a lot of water. Special attention: The water poured into the toilet cannot be flushed directly against the ceramic surface, and the water temperature is required to be low to high.
Feeding feces and toilet paper:
(1), fill a bucket of water, carry the bucket to about 80 cm from the ground, and pour it into the toilet at one time.
(2) When the water level in the toilet is high, use the toilet to pull it in and press it quickly twice in a row, and then pull it out vigorously.